Thread M6 | Stroke 40 to 300 mm | Force 50 to 750N
1. Reference
The threaded end compression gas springs is compatible with a large range of end fittings according to your needs. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum play of 0.5mm required). Screw the end fitting completely onto the gas spring thread without leaving any gap.
Thread M6 | Stroke 40 to 300 mm | Force 50 to 750N
1. Reference
The threaded end compression gas springs is compatible with a large range of end fittings according to your needs. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum play of 0.5mm required). Screw the end fitting completely onto the gas spring thread without leaving any gap.
Thread M6 | Stroke 40 to 300 mm | Force 50 to 750N
1. Reference
The threaded end compression gas springs is compatible with a large range of end fittings according to your needs. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum play of 0.5mm required). Screw the end fitting completely onto the gas spring thread without leaving any gap.
Thread M6 | Stroke 40 to 300 mm | Force 50 to 750N
1. Reference
The threaded end compression gas springs is compatible with a large range of end fittings according to your needs. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum play of 0.5mm required). Screw the end fitting completely onto the gas spring thread without leaving any gap.
Thread M6 | Stroke 40 to 300 mm | Force 50 to 750N
1. Reference
The threaded end compression gas springs is compatible with a large range of end fittings according to your needs. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum play of 0.5mm required). Screw the end fitting completely onto the gas spring thread without leaving any gap.
Thread M6 | Stroke 40 to 300 mm | Force 50 to 750N
1. Reference
The threaded end compression gas springs is compatible with a large range of end fittings according to your needs. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum play of 0.5mm required). Screw the end fitting completely onto the gas spring thread without leaving any gap.
Thread M6 | Stroke 40 to 300 mm | Force 50 to 750N
1. Reference
The threaded end compression gas springs is compatible with a large range of end fittings according to your needs. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum play of 0.5mm required). Screw the end fitting completely onto the gas spring thread without leaving any gap.
Thread M6 | Stroke 40 to 300 mm | Force 50 to 750N
1. Reference
The threaded end compression gas springs is compatible with a large range of end fittings according to your needs. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum play of 0.5mm required). Screw the end fitting completely onto the gas spring thread without leaving any gap.
Thread M6 | Stroke 40 to 300 mm | Force 50 to 750N
1. Reference
The threaded end compression gas springs is compatible with a large range of end fittings according to your needs. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum play of 0.5mm required). Screw the end fitting completely onto the gas spring thread without leaving any gap.
Thread M6 | Stroke 40 to 300 mm | Force 50 to 750N
1. Reference
The threaded end compression gas springs is compatible with a large range of end fittings according to your needs. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum play of 0.5mm required). Screw the end fitting completely onto the gas spring thread without leaving any gap.
Thread M6 | Stroke 40 to 300 mm | Force 50 to 750N
1. Reference
The threaded end compression gas springs is compatible with a large range of end fittings according to your needs. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum play of 0.5mm required). Screw the end fitting completely onto the gas spring thread without leaving any gap.
Thread M6 | Stroke 40 to 300 mm | Force 50 to 750N
1. Reference
The threaded end compression gas springs is compatible with a large range of end fittings according to your needs. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum play of 0.5mm required). Screw the end fitting completely onto the gas spring thread without leaving any gap.
Thread M6 | Stroke 40 to 300 mm | Force 50 to 750N
1. Reference
The threaded end compression gas springs is compatible with a large range of end fittings according to your needs. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum play of 0.5mm required). Screw the end fitting completely onto the gas spring thread without leaving any gap.
Thread M6 | Stroke 40 to 300 mm | Force 50 to 750N
1. Reference
The threaded end compression gas springs is compatible with a large range of end fittings according to your needs. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum play of 0.5mm required). Screw the end fitting completely onto the gas spring thread without leaving any gap.
Thread M6 | Stroke 40 to 300 mm | Force 50 to 750N
1. Reference
The threaded end compression gas springs is compatible with a large range of end fittings according to your needs. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum play of 0.5mm required). Screw the end fitting completely onto the gas spring thread without leaving any gap.
Thread M6 | Stroke 40 to 300 mm | Force 50 to 750N
1. Reference
The threaded end compression gas springs is compatible with a large range of end fittings according to your needs. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum play of 0.5mm required). Screw the end fitting completely onto the gas spring thread without leaving any gap.
Thread M6 | Stroke 40 to 300 mm | Force 50 to 750N
1. Reference
The threaded end compression gas springs is compatible with a large range of end fittings according to your needs. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum play of 0.5mm required). Screw the end fitting completely onto the gas spring thread without leaving any gap.
Thread M6 | Stroke 40 to 300 mm | Force 50 to 750N
1. Reference
The threaded end compression gas springs is compatible with a large range of end fittings according to your needs. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum play of 0.5mm required). Screw the end fitting completely onto the gas spring thread without leaving any gap.
Thread M6 | Stroke 40 to 300 mm | Force 50 to 750N
1. Reference
The threaded end compression gas springs is compatible with a large range of end fittings according to your needs. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum play of 0.5mm required). Screw the end fitting completely onto the gas spring thread without leaving any gap.
Thread M6 | Stroke 40 to 300 mm | Force 50 to 750N
1. Reference
The threaded end compression gas springs is compatible with a large range of end fittings according to your needs. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum play of 0.5mm required). Screw the end fitting completely onto the gas spring thread without leaving any gap.
Thread M6 | Stroke 40 to 300 mm | Force 50 to 750N
1. Reference
The threaded end compression gas springs is compatible with a large range of end fittings according to your needs. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum play of 0.5mm required). Screw the end fitting completely onto the gas spring thread without leaving any gap.
Thread M6 | Stroke 40 to 300 mm | Force 50 to 750N
1. Reference
The threaded end compression gas springs is compatible with a large range of end fittings according to your needs. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum play of 0.5mm required). Screw the end fitting completely onto the gas spring thread without leaving any gap.
Thread M6 | Stroke 40 to 300 mm | Force 50 to 750N
1. Reference
The threaded end compression gas springs is compatible with a large range of end fittings according to your needs. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum play of 0.5mm required). Screw the end fitting completely onto the gas spring thread without leaving any gap.
Thread M6 | Stroke 40 to 300 mm | Force 50 to 750N
1. Reference
The threaded end compression gas springs is compatible with a large range of end fittings according to your needs. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum play of 0.5mm required). Screw the end fitting completely onto the gas spring thread without leaving any gap.
There are [XX] pieces left in stock, reduce your quantity or contact us.
Continue my shopping
Share the product
Decision Help not available
This service is reserved for professionals who have created a Berthold Marx web account.
Manage my cookies
We use cookies We use cookies and other tracking technologies to enhance your experience on our site, to show you personalized content and targeted advertisements, to analyze our site traffic, and to understand where our visitors come from.
Share the product