Berthold Marx
Cart
Berthold Marx
Where can you find our references?
Home > Our products > Compression gas springs > Welded eyes Gas Spring - Rod 10mm

Welded eyes Gas Spring - Rod 10mm

Hole 8.1mm | Stroke 100 to 400 mm | Force 100 to 1150N

1. Reference

The welded eyes compression gas spring is equiped with 2 welded eyes assemble in factory. It's the most economical solution. Caution: does not tolerate lateral forces. Check the parallelism of the fixing points. Never tighten the gas springs on the axis (minimum gap of 0.5mm required).

Print

Welded eyes Gas Spring - Rod 10mm

Hole 8.1mm | Stroke 100 to 400 mm | Force 100 to 1150N

1. Reference

The welded eyes compression gas spring is equiped with 2 welded eyes assemble in factory. It's the most economical solution. Caution: does not tolerate lateral forces. Check the parallelism of the fixing points. Never tighten the gas springs on the axis (minimum gap of 0.5mm required).

2. Enter the force
?

The force entered is a nominal force. The gas spring supplied is compliant if its actual force remains within the inflation tolerances shown below.

Force in Newtons

Tolerance margin
30 ≤ N < 50 + or - 10 N
50 ≤ N < 250 + or - 20 N
250 ≤ N < 750 + or - 30 N
750 ≤ N < 1500 + or - 60 N 
1500 ≤ N < 3000 + or - 150 N
3000 ≤ N < 6000 + or - 300 N
Your gas spring reference will be :
45.32 € HT Piece 60.43 €
54.38 € TTC
Available
-
+
Traceparts
Print
Features
Reference
ST 100+F1+D10
Material
Steel
Rod end fitting
Welded eyes
Tube end fitting
Welded eyes
Stroke
100 mm
Rod diameter
10 mm
Tube diameter
21 mm
Extended length
285 mm
Gas spring min. force
100 N
Gas spring max. force
1150 N
Rod material
Nitrided steel
Tube material
Black epoxy painted steel
End type
Welded
Valve
No
Hole
8.1 mm
Related products
The items below are suitable for your selected product
ST P100D8 |
ST P100D8
ST P100D8 |
ST P100D8
9.80 € HT
11.76 € TTC
Available
-
+
ST P101 | Raised Bracket with Axis of 6 mm | Aluminium
ST P101
ST P101 | Raised Bracket with Axis of 6 mm | Aluminium
ST P101
8.95 € HT
10.74 € TTC
Available
-
+

Welded eyes Gas Spring - Rod 10mm

Hole 8.1mm | Stroke 100 to 400 mm | Force 100 to 1150N

1. Reference

The welded eyes compression gas spring is equiped with 2 welded eyes assemble in factory. It's the most economical solution. Caution: does not tolerate lateral forces. Check the parallelism of the fixing points. Never tighten the gas springs on the axis (minimum gap of 0.5mm required).

2. Enter the force
?

The force entered is a nominal force. The gas spring supplied is compliant if its actual force remains within the inflation tolerances shown below.

Force in Newtons

Tolerance margin
30 ≤ N < 50 + or - 10 N
50 ≤ N < 250 + or - 20 N
250 ≤ N < 750 + or - 30 N
750 ≤ N < 1500 + or - 60 N 
1500 ≤ N < 3000 + or - 150 N
3000 ≤ N < 6000 + or - 300 N
Your gas spring reference will be :
45.32 € HT Piece 60.43 €
54.38 € TTC
Available
-
+
Traceparts
Print
Features
Reference
ST 150+F1+D10
Material
Steel
Rod end fitting
Welded eyes
Tube end fitting
Welded eyes
Stroke
150 mm
Rod diameter
10 mm
Tube diameter
21 mm
Extended length
385 mm
Gas spring min. force
100 N
Gas spring max. force
1150 N
Rod material
Nitrided steel
Tube material
Black epoxy painted steel
End type
Welded
Valve
No
Hole
8.1 mm
Related products
The items below are suitable for your selected product
ST P100D8 |
ST P100D8
ST P100D8 |
ST P100D8
9.80 € HT
11.76 € TTC
Available
-
+
ST P101 | Raised Bracket with Axis of 6 mm | Aluminium
ST P101
ST P101 | Raised Bracket with Axis of 6 mm | Aluminium
ST P101
8.95 € HT
10.74 € TTC
Available
-
+

Welded eyes Gas Spring - Rod 10mm

Hole 8.1mm | Stroke 100 to 400 mm | Force 100 to 1150N

1. Reference

The welded eyes compression gas spring is equiped with 2 welded eyes assemble in factory. It's the most economical solution. Caution: does not tolerate lateral forces. Check the parallelism of the fixing points. Never tighten the gas springs on the axis (minimum gap of 0.5mm required).

2. Enter the force
?

The force entered is a nominal force. The gas spring supplied is compliant if its actual force remains within the inflation tolerances shown below.

Force in Newtons

Tolerance margin
30 ≤ N < 50 + or - 10 N
50 ≤ N < 250 + or - 20 N
250 ≤ N < 750 + or - 30 N
750 ≤ N < 1500 + or - 60 N 
1500 ≤ N < 3000 + or - 150 N
3000 ≤ N < 6000 + or - 300 N
Your gas spring reference will be :
45.32 € HT Piece 60.43 €
54.38 € TTC
Available
-
+
Traceparts
Print
Features
Reference
ST 200+F1+D10
Material
Steel
Rod end fitting
Welded eyes
Tube end fitting
Welded eyes
Stroke
200 mm
Rod diameter
10 mm
Tube diameter
21 mm
Extended length
485 mm
Gas spring min. force
100 N
Gas spring max. force
1150 N
Rod material
Nitrided steel
Tube material
Black epoxy painted steel
End type
Welded
Valve
No
Hole
8.1 mm
Related products
The items below are suitable for your selected product
ST P100D8 |
ST P100D8
ST P100D8 |
ST P100D8
9.80 € HT
11.76 € TTC
Available
-
+
ST P101 | Raised Bracket with Axis of 6 mm | Aluminium
ST P101
ST P101 | Raised Bracket with Axis of 6 mm | Aluminium
ST P101
8.95 € HT
10.74 € TTC
Available
-
+

Welded eyes Gas Spring - Rod 10mm

Hole 8.1mm | Stroke 100 to 400 mm | Force 100 to 1150N

1. Reference

The welded eyes compression gas spring is equiped with 2 welded eyes assemble in factory. It's the most economical solution. Caution: does not tolerate lateral forces. Check the parallelism of the fixing points. Never tighten the gas springs on the axis (minimum gap of 0.5mm required).

2. Enter the force
?

The force entered is a nominal force. The gas spring supplied is compliant if its actual force remains within the inflation tolerances shown below.

Force in Newtons

Tolerance margin
30 ≤ N < 50 + or - 10 N
50 ≤ N < 250 + or - 20 N
250 ≤ N < 750 + or - 30 N
750 ≤ N < 1500 + or - 60 N 
1500 ≤ N < 3000 + or - 150 N
3000 ≤ N < 6000 + or - 300 N
Your gas spring reference will be :
45.32 € HT Piece 60.43 €
54.38 € TTC
Available
-
+
Traceparts
Print
Features
Reference
ST 250+F1+D10
Material
Steel
Rod end fitting
Welded eyes
Tube end fitting
Welded eyes
Stroke
250 mm
Rod diameter
10 mm
Tube diameter
21 mm
Extended length
585 mm
Gas spring min. force
100 N
Gas spring max. force
1050 N
Rod material
Nitrided steel
Tube material
Black epoxy painted steel
End type
Welded
Valve
No
Hole
8.1 mm
Related products
The items below are suitable for your selected product
ST P100D8 |
ST P100D8
ST P100D8 |
ST P100D8
9.80 € HT
11.76 € TTC
Available
-
+
ST P101 | Raised Bracket with Axis of 6 mm | Aluminium
ST P101
ST P101 | Raised Bracket with Axis of 6 mm | Aluminium
ST P101
8.95 € HT
10.74 € TTC
Available
-
+

Welded eyes Gas Spring - Rod 10mm

Hole 8.1mm | Stroke 100 to 400 mm | Force 100 to 1150N

1. Reference

The welded eyes compression gas spring is equiped with 2 welded eyes assemble in factory. It's the most economical solution. Caution: does not tolerate lateral forces. Check the parallelism of the fixing points. Never tighten the gas springs on the axis (minimum gap of 0.5mm required).

2. Enter the force
?

The force entered is a nominal force. The gas spring supplied is compliant if its actual force remains within the inflation tolerances shown below.

Force in Newtons

Tolerance margin
30 ≤ N < 50 + or - 10 N
50 ≤ N < 250 + or - 20 N
250 ≤ N < 750 + or - 30 N
750 ≤ N < 1500 + or - 60 N 
1500 ≤ N < 3000 + or - 150 N
3000 ≤ N < 6000 + or - 300 N
Your gas spring reference will be :
45.32 € HT Piece 60.43 €
54.38 € TTC
Available
-
+
Traceparts
Print
Features
Reference
ST 300+F1+D10
Material
Steel
Rod end fitting
Welded eyes
Tube end fitting
Welded eyes
Stroke
300 mm
Rod diameter
10 mm
Tube diameter
21 mm
Extended length
685 mm
Gas spring min. force
100 N
Gas spring max. force
1050 N
Rod material
Nitrided steel
Tube material
Black epoxy painted steel
End type
Welded
Valve
No
Hole
8.1 mm
Related products
The items below are suitable for your selected product
ST P100D8 |
ST P100D8
ST P100D8 |
ST P100D8
9.80 € HT
11.76 € TTC
Available
-
+
ST P101 | Raised Bracket with Axis of 6 mm | Aluminium
ST P101
ST P101 | Raised Bracket with Axis of 6 mm | Aluminium
ST P101
8.95 € HT
10.74 € TTC
Available
-
+

Welded eyes Gas Spring - Rod 10mm

Hole 8.1mm | Stroke 100 to 400 mm | Force 100 to 1150N

1. Reference

The welded eyes compression gas spring is equiped with 2 welded eyes assemble in factory. It's the most economical solution. Caution: does not tolerate lateral forces. Check the parallelism of the fixing points. Never tighten the gas springs on the axis (minimum gap of 0.5mm required).

2. Enter the force
?

The force entered is a nominal force. The gas spring supplied is compliant if its actual force remains within the inflation tolerances shown below.

Force in Newtons

Tolerance margin
30 ≤ N < 50 + or - 10 N
50 ≤ N < 250 + or - 20 N
250 ≤ N < 750 + or - 30 N
750 ≤ N < 1500 + or - 60 N 
1500 ≤ N < 3000 + or - 150 N
3000 ≤ N < 6000 + or - 300 N
Your gas spring reference will be :
45.32 € HT Piece 60.43 €
54.38 € TTC
Available
-
+
Traceparts
Print
Features
Reference
ST 330+F1+D10
Material
Steel
Rod end fitting
Welded eyes
Tube end fitting
Welded eyes
Stroke
330 mm
Rod diameter
10 mm
Tube diameter
21 mm
Extended length
740 mm
Gas spring min. force
100 N
Gas spring max. force
1050 N
Rod material
Nitrided steel
Tube material
Black epoxy painted steel
End type
Welded
Valve
No
Hole
8.1 mm
Related products
The items below are suitable for your selected product
ST P100D8 |
ST P100D8
ST P100D8 |
ST P100D8
9.80 € HT
11.76 € TTC
Available
-
+
ST P101 | Raised Bracket with Axis of 6 mm | Aluminium
ST P101
ST P101 | Raised Bracket with Axis of 6 mm | Aluminium
ST P101
8.95 € HT
10.74 € TTC
Available
-
+

Welded eyes Gas Spring - Rod 10mm

Hole 8.1mm | Stroke 100 to 400 mm | Force 100 to 1150N

1. Reference

The welded eyes compression gas spring is equiped with 2 welded eyes assemble in factory. It's the most economical solution. Caution: does not tolerate lateral forces. Check the parallelism of the fixing points. Never tighten the gas springs on the axis (minimum gap of 0.5mm required).

2. Enter the force
?

The force entered is a nominal force. The gas spring supplied is compliant if its actual force remains within the inflation tolerances shown below.

Force in Newtons

Tolerance margin
30 ≤ N < 50 + or - 10 N
50 ≤ N < 250 + or - 20 N
250 ≤ N < 750 + or - 30 N
750 ≤ N < 1500 + or - 60 N 
1500 ≤ N < 3000 + or - 150 N
3000 ≤ N < 6000 + or - 300 N
Your gas spring reference will be :
45.32 € HT Piece 60.43 €
54.38 € TTC
Available
-
+
Traceparts
Print
Features
Reference
ST 350+F1+D10
Material
Steel
Rod end fitting
Welded eyes
Tube end fitting
Welded eyes
Stroke
350 mm
Rod diameter
10 mm
Tube diameter
21 mm
Extended length
785 mm
Gas spring min. force
100 N
Gas spring max. force
1000 N
Rod material
Nitrided steel
Tube material
Black epoxy painted steel
End type
Welded
Valve
No
Hole
8.1 mm
Related products
The items below are suitable for your selected product
ST P100D8 |
ST P100D8
ST P100D8 |
ST P100D8
9.80 € HT
11.76 € TTC
Available
-
+
ST P101 | Raised Bracket with Axis of 6 mm | Aluminium
ST P101
ST P101 | Raised Bracket with Axis of 6 mm | Aluminium
ST P101
8.95 € HT
10.74 € TTC
Available
-
+

Welded eyes Gas Spring - Rod 10mm

Hole 8.1mm | Stroke 100 to 400 mm | Force 100 to 1150N

1. Reference

The welded eyes compression gas spring is equiped with 2 welded eyes assemble in factory. It's the most economical solution. Caution: does not tolerate lateral forces. Check the parallelism of the fixing points. Never tighten the gas springs on the axis (minimum gap of 0.5mm required).

2. Enter the force
?

The force entered is a nominal force. The gas spring supplied is compliant if its actual force remains within the inflation tolerances shown below.

Force in Newtons

Tolerance margin
30 ≤ N < 50 + or - 10 N
50 ≤ N < 250 + or - 20 N
250 ≤ N < 750 + or - 30 N
750 ≤ N < 1500 + or - 60 N 
1500 ≤ N < 3000 + or - 150 N
3000 ≤ N < 6000 + or - 300 N
Your gas spring reference will be :
45.32 € HT Piece 60.43 €
54.38 € TTC
Cuurently out of stock
-
+
Add to cart
Traceparts
Print
Features
Reference
ST 400+F1+D10
Material
Steel
Rod end fitting
Welded eyes
Tube end fitting
Welded eyes
Stroke
400 mm
Rod diameter
10 mm
Tube diameter
21 mm
Extended length
885 mm
Gas spring min. force
100 N
Gas spring max. force
900 N
Rod material
Nitrided steel
Tube material
Black epoxy painted steel
End type
Welded
Valve
No
Hole
8.1 mm
Related products
The items below are suitable for your selected product
ST P100D8 |
ST P100D8
ST P100D8 |
ST P100D8
9.80 € HT
11.76 € TTC
Available
-
+
ST P101 | Raised Bracket with Axis of 6 mm | Aluminium
ST P101
ST P101 | Raised Bracket with Axis of 6 mm | Aluminium
ST P101
8.95 € HT
10.74 € TTC
Available
-
+
Manage my cookies

We use cookies
We use cookies and other tracking technologies to enhance your experience on our site, to show you personalized content and targeted advertisements, to analyze our site traffic, and to understand where our visitors come from.

Accept
Refuse